Place of Origin:
China
Brand Name:
HDPARTS
Model Number:
6D95
Contact Us
6D95 Engine Cylinder liner 6207-21-2110 For KOMATSU
Specification
| Applicable models | 6D95 |
| Type | Cylinder liner |
| Original number | 6207-21-2110 |
| Warranty | 6 months |
| Engine Type | Diesel |
| Brand Name | HDPARTS |
| Condition | New |
| Size | OEM Size |
| The cylinder liner is | The cylinder liner is the abbreviation of the cylinder liner. It is embedded in the cylinder barrel of the cylinder block and forms the combustion chamber together with the piston and cylinder head |
| Causes of cylinder scuffing |
The reasons for cylinder pulling are very complex, including design reasons, such as the selection of materials, determination of clearance size, whether the installation of devices is appropriate, whether the structural layout is reasonable, whether the surface roughness is appropriate, and whether the lubrication and cooling arrangements are perfect. From the perspective of management, the following reasons may be responsible: (1) Poor lubrication of cylinder: The cylinder is short of lubricating oil or the oil supply is interrupted, and the cylinder is pulled due to direct metal contact The reasons for poor cylinder lubrication include: too little oil in the oil pan or poor oil quality, too high temperature of the diesel engine, or damage or failure of the piston ring (mainly the oil ring). (2) Insufficient running in: To get effective running in in the shortest possible time, the running in time and load distribution must be considered Running in cannot be completed even if it takes a long time under low load. If it is urgent to run under high load, it will cause cylinder scuffing Therefore, during the running in period of diesel engine, attention should be paid to: properly increase the fuel injection amount during the running in period; After the piston ring is replaced, it shall be operated under low load for a period of time; After the piston and cylinder liner are renewed, they should be run in before increasing the load. |
PRODUCT CATEGORIES
PACKAGE:
Neutral packing / Our own trademark packing / Your brand OEM packing / Packing according to your requirements.
We get to start preparing the goods when we receive payment from you. (The goods will be sent between 48 hours to 72 hours if we have in stock. The goods will be sent before the delivery time and the sample will send to you for checking.)
Send your inquiry directly to us
