Place of Origin:
China
Brand Name:
HDPARTS
Model Number:
PC400-5 6D125
Contact Us
PC400-5 6D125 Diesel Cylinder Head 6151-11-1101
Specification
| Applicable models |
PC400-5 6D125 |
| Type | Cylinder Head |
| Original number | 6151-11-1101 |
| Warranty | 6 months |
| Engine Type | Diesel |
| Brand Name | HDPARTS |
| Condition | New |
| Size | OEM Size |
Cylinder cracking edit broadcastThe temperature is low in winter, and the cylinder head of diesel engine is prone to cracks and water leakage. The main reasons are as follows:1. Add cooling water after starting. After the diesel engine is started, the temperature inside the engine rises immediately. If cooling water is added at this time, the cylinder block and cylinder head will cool down rapidly, and cracks will occur due to cold shrinkage.2. After shutting down, there is no cooling water. The water in the engine freezes into ice, the volume increases, and the cylinder block and cylinder head burst.3. When the diesel engine is running, the cooling water is insufficient or the temperature of the water tank is too high, and the cooling water is suddenly added. Cracking can also be caused by overcooling and shrinkage of the cylinder block and cylinder head.4. The diesel engine runs for a long time, the temperature inside the engine is high, and the high-temperature water is released immediately after parking. It will cause high temperature parts to crack when they encounter cold air suddenly.5. Use the decompression machine to stop, so that the high temperature cylinder head suddenly encounters cold air and causes cracking.There are the following methods to prevent cracking of various cylinder blocks and cylinder heads:1. Before starting the diesel engine, warm water should be added to the water tank. In the severe winter season, the hot water should be poured 2~3 times. It is better to start when the water flowing out of the drain valve is about 30~50℃.2. When the diesel engine has been running for a long time, wait for about half an hour after stopping, and then release the cooling water when the engine temperature drops to 40~50°C. After draining the water, it is best to poke through the drain valve switch with a thin iron wire to prevent sediment from clogging the drain valve.3. When the diesel engine is overheated and seriously lacks water, let the diesel engine idle at low speed for 10-15 minutes, and then slowly add cooling water
Company Information
Guangzhou Star Mustang Construction Machinery Parts Co., Ltd. is a construction machinery engine parts company integrating research and development, agency, domestic and international sales and e-commerce.
At presentIt was the first one to enter the construction machinery parts market in 1995. It is located in the center of the world's largest industrial distribution center.
is supported by scientific research and development strength, new business philosophy, mature marketing team, development and sales of high quality excavator parts.
covers a wide range, and its products are characterized by high strength, high toughness, high temperature resistance, no deformation, high wear resistance, etc.
Including Hydraulics parts, Final Drives parts, Undercarriage parts, General consumable parts, Engine spare parts, and stuff like that which are high-qualified products.
The product matching different kinds of excavator spare parts, which caters to the current market demand for high.
Packaging & Shipping
Packaging material:Plastic, carton, wooden box
We get to start preparing the goods when we receive payment from you. (The goods will be sent between 48 hours to 72 hours if we have in stock. The goods will be sent before the delivery time and the sample will send to you for checking.)
Packaging & Shipping
Send your inquiry directly to us
