Place of Origin:
China
Brand Name:
HDPARTS
Model Number:
PC400-8 6D125-8
Contact Us
PC400-8 6D125-8 Engine Cylinder Head 6151-11-1104
Specification
| Applicable models |
PC400-8 6D125-8 |
| Type | Cylinder Head |
| Original number | 6151-11-1104 |
| Warranty | 6 months |
| Engine Type | Diesel |
| Brand Name | HDPARTS |
| Condition | New |
| Size | OEM Size |
2. Measures to prevent early wear of cylinders(1) The new or overhauled diesel engine must undergo strict running-in test operation before it can be officially put into operation.(2) Regularly check and maintain the air filter, oil filter, diesel filter, so that it is in a good technical condition to work, which is an important measure to prevent dust impurities from entering the cylinder from the air, fuel and oil passage, reduce cylinder wear and extend the service life of the engine.(3) Replace the oil pan oil regularly, and the added oil must meet the requirements of the manual. When replacing the oil pan oil, the oil pan and lubricating oil circuit should be carefully cleaned, the method is to first drain the spoiled oil, use the same amount of clean diesel, pour into the oil pan, start the engine, idle for 3-5 minutes, drain and clean the diesel, and then clean the oil pan, clean the oil filter at the same time, and finally add the specified amount of oil.(4) It is strictly forbidden to start first and then add water, otherwise it is easy to make the cylinder suddenly cool and crack.(5) Maintain the normal working temperature of the engine frequently, if it is too high, the oil will be diluted, and the lubrication conditions will deteriorate; If it is too low, it will produce acid corrosion, causing pockmarks to peel off. Generally, the suitable working temperature is 70-80 °C, and the evaporative engine can be slightly higher.
Company Information
Guangzhou Star Mustang Construction Machinery Parts Co., Ltd. is a construction machinery engine parts company integrating research and development, agency, domestic and international sales and e-commerce.
At presentIt was the first one to enter the construction machinery parts market in 1995. It is located in the center of the world's largest industrial distribution center.
is supported by scientific research and development strength, new business philosophy, mature marketing team, development and sales of high quality excavator parts.
covers a wide range, and its products are characterized by high strength, high toughness, high temperature resistance, no deformation, high wear resistance, etc.
Including Hydraulics parts, Final Drives parts, Undercarriage parts, General consumable parts, Engine spare parts, and stuff like that which are high-qualified products.
The product matching different kinds of excavator spare parts, which caters to the current market demand for high.
Packaging & Shipping
Packaging material:Plastic, carton, wooden box
We get to start preparing the goods when we receive payment from you. (The goods will be sent between 48 hours to 72 hours if we have in stock. The goods will be sent before the delivery time and the sample will send to you for checking.)
Packaging & Shipping
Send your inquiry directly to us
